SEARCH Advanced search.

Back to Catalog Index

ELECTRO-MAGNETIC DRILLS

Click below for details

MANUFACTURERS

YOUR CART

Cart is empty

AUTHENTICATION

Your e-mail:

Type the characters you see in the picture:

Get a different code

Portable Drilling on any Ferrous Material 1/2" thick or more

Secure on-site drilling with...

Feedback speed control,
Motor/Magnet lockout to prevent de-magnetizing during operation,
Choice of chuck or Morse Taper and
Drill sizes up to 3/4"

Milwaukee Electromagnetic Drill Press with 3/4 in. Motor

Milwaukee Electro Magnetic Drill Press with 3/4" Chuck 4210-1 Electromagnetic Drill Press with 3/4 in. Motor: Product Features:• 3/4 inch capacity, 12.5 amp motor, 350 RPM• Solid state electronic switching• Feedback speed control• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line. This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. Includes 4203 base and 4262-1 motor. MIL 4210-1

Price $1,477.19 USD* each. Add to cart

For prices in Canadian currency, click item "Add to Cart" icon.

Industry Depot is.

To compare Electromagnetic Drills, click COMPARISON FEATURE

Milwaukee No. 3 MT Motor for Electromagnetic Drill Press (1-1/4 inch capacity, 11.5 amp motor, 750/375 RPM)

Milwaukee Electro Magnetic No. 3 MT Motor for Electromagnetic Drill Press (1-1/4" capacity, 750/375 rpm 1-1/4 inch capacity, 11.5 amp motor, 750/375 RPM Dual Mount Gear Case/Reverse Mount for tight quarter drilling. Taps up to 1 inch-14 threaded hole. Develops up to 1600 pounds of drill point pressure with a 1 inch steel plate
Specifications: Voltage 120 AC Only, Drill Capacity 1-1/4 in., Amps 11.5, No Load Speed 750/375 RPM. Tap Capacity 1 in.-14, Drill Point Pressure 1,530/1,600 lbs. Chuck or Taper No. 3MT. Tool Weight 23.0 lbs. Shipping Weight 25.0 lbs.
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 375 and 750 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.

Part No. MIL 4292-1 Price $760.78USD* each. Add to cart

Milwaukee 3 MT Motor for Electromagnetic Drill Press, 1-1/4" (1-1/4 inch capacity, 11.5 amp motor, 500/250 RPM)

Milwaukee Electro Magnetic No. 3 MT Motor for Electromagnetic Drill Press (1-1/4" capacity, 500/250 rpm 3 MT Motor for Electromagnetic Drill Press, 1-1/4", 1-1/4 inch capacity, 11.5 amp motor, 500/250 RPM. Dual Mount Gear Case/Reverse Mount for tight quarter drilling. Taps up to 1 inch-14 threaded hole. Develops up to 1600 pounds of drill point pressure with a 1 inch steel plate
Specifications: Voltage 120 AC Only, Drill Capacity 1-1/4 in. Amps 11.5. No Load Speed 500/250 RPM. Tap Capacity 1 in.-14. Drill Point Pressure. 1,530/1,600 lbs. Chuck or Taper No. 3MT. Tool Weight 23.0 lbs. Shipping Weight 25.0 lbs.
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 250 and 500 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.

Part No.MIL 4297-1 Price $760.78USD* each. Add to cart