Home    Industry Depot Catalogs    Shopping Cart  Contact Us 

Phone US & Canada 1-888-849-8034
International: 416-816-7447

SEARCH Advanced search.

Back to Catalog Index

POWERLIFT® PERMANENT LIFTING MAGNETS 

Click below for details

 

CATEGORIES

MANUFACTURERS

YOUR CART

Cart is empty

AUTHENTICATION

Username

Password
Your e-mail:
Type the characters you see in the picture:

Get a different code

PowerLift® Rare Earth Lifting Magnets - Designed for Thick, Non-Flexing Material

  

These compact, yet powerful, Rare Earth lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts also eliminate the fear of dropping the load being lifted due to power failures.

 

 

 

  • ON/OFF Rare Earth design
  • Lifts flat or round loads
  • Easy internal manual release does not contact the load
  • Heat resistant up to 200°F (94°C)
  • CONFORMS TO ASME B30.20 STANDARDS

 

 

 

Industrial Magnetics PowerLift Permanent Lifting MagnetLock On & Off Features
The new handle on the PowerLift Rare® Earth lift magnet features a positive lock-on and lock-off mechanism that requires the operator to manually switch between the two states. This prevents the handle from being turned only ”partially on” and giving the operator a false sense of security that the magnet is holding safely, or from being accidentally bumped to the “off” position, dropping the load pre-maturely.

To order now, click on "Add to cart" in theRare Earth PowerLift Magnets Ordering Gude next to the model you want*.

Risk Free!  If not completely satisfied with your PowerLift lifting magnets, you get a full 100% Money-Back refund!

 

Rare Earth PowerLift® Magnets Ordering Guide
Part No. Holding Value* (flat) Holding Value* (round) Overall
Ln. (in)		 Magnet
Wd. (in)		 Overall
Ht. (in)		 Handle (in) Weight (lbs) Price, USD Buy Now
PNL220 220 lbs. 110 lbs. 5 2-5/8 6-5/8 5-7/8 7 $265.38  Add to cart
PNL800 800 lbs. 400 lbs. 7-7/8 3-5/8 8-7/8 6-7/8 22
$636.54
 Add to cart
PNL1600 1,600 lbs. 800 lbs. 10-3/4 4-7/8 8-7/8 6-3/4 53 $862.50  Add to cart
PNL2500 2,500 lbs. 1,250 lbs. 12-5/8 7-1/8 8-7/8 10-1/8 110 $1,661.54   Add to cart
PNL5000 5,000 lbs. 2,500 lbs. 16-1/2 9-1/4 18 16-3/4 325 $2,964.42  Add to cart
PNL6600 6,600 lbs. 3,300 lbs. 20 11-1/4 22-1/4 20-5/8 485 $5,603.85  Add to cart

Buy  2 PowerLift PNL220s  for $519.00
PNL220-2 220 lbs. 110 lbs. 5 2-5/8 6-5/8 5-7/8 7 $519.00  Add to cart

Buy 3 PowerLift Lifting Magnet Sets and SAVE More!!!
PNL220-3 220 lbs. 110 lbs. 5 2-5/8 6-5/8 5-7/8 7 $769.00 Add to cart
PNL800-3 800 lbs. 400 lbs. 7-7/8 3-5/8 8-7/8 6-7/8 22
$1,879.00
Add to cart
PNL1600-3 1,600 lbs. 800 lbs. 10-3/4 4-7/8 8-7/8 6-3/4 53 $2,499.00 Add to cart
PNL2500-3 2,500 lbs. 1,250 lbs. 12-5/8 7-1/8 8-7/8 10-1/8 110 $4,909.00 Add to cart
PNL5000-3 5,000 lbs. 2,500 lbs. 16-1/2 9-1/4 18 16-3/4 325 $8,749.00 Add to cart
*Holding Values Are Stated At 33% Of The Actual Value. See Holding Value & Maximum Sheet Length Chart Below.

*Click for the Shopping Cart price screen.  For shipping costs, enter your user name and password or register if you are a new customer.  Orders will be processed and credit cards charged only after you  click "Submit order".     We accept all major credit cards.

HOLDING VALUE & **MAXIMUM SHEET LENGTH (Due to Sag for Material Thickness for Single Magnet Use)
Pull (lbs.) 1/4" (6') 3/8" (8') 1/2" (8') 3/4" (8') 1" (10') 2" (10') 3" (10')
220 180 220 220 220 220 220 220
660 270 500 615 660 660 660 660
1300 CF CF 800 1300 1300 1300 1300
2200 NA NA CF CF 1490 2200 2200
4400 NA NA NA NA CF 2625 4400
6600 NA NA NA NA NA NA 6600
We recommend when lifting sheets over 8', to use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once.
**These maximum sheet lengths are selected due to the sag characteristics of the specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF=Consult Factory, NA=Not Applicable(magnets listed will not turn "on" for specified material thickness.)

Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.
Click for EZ-Lift Magnets    VersaLift Magnets     CreativeLift Magnets

 

E-commerce business and online market development

Productivity improvement, project management,  product development

CONTRACT MANUFACTURING

Components, Equipment, Electronics and more!

Click For BUYERS or Click for SELLERS

PRODUCTIVITY NEWS E-letter Back Issues  For your free copy Register  
INDUSTRY DEPOT  LINE CARD

      home | about us | contact us |faq |info booth | privacy policy | marketplace        

   Copyright © 1999-2012 Inventory Depot, Inc. All rights reserved.