CATEGORIES

MANUFACTURERS

YOUR CART

Cart is empty

AUTHENTICATION

Your e-mail:

Type the characters you see in the picture:

Get a different code

Securely hold parts, even when access is limited!

SIDELOC CLAMPS ...For Holding Parts on the Bore

Mitee-Bite introduces a new style clamp to its range of ID Xpansion clamps, the SIDE-LOC Xpansion clamp which is an ideal way to hold parts on the bore when you can not access the tapered screw. The SIDE-LOC Xpansion clamp is actuated by turning a socket head cam, on the side, which moves a tapered plunger to expand the clamp. The locking ring provides accurate preset diameter and rigidity for machining. Like our original ID Xpansion clamps, the SIDE-LOC Xpansion clamp has the dead length feature which is critical for close tolerance dimensions. The SIDE-LOC Xpansion clamp is designed in two styles, one for milling operations and one for lathe applications.3D Machining Clamps Boost Accuracy & Productivity.

Presently one size is available for each model. The mill SIDE-LOC Xpansion clamp can be machined from 1.120 to .710 and the lathe version from 2.09 to .710. The lathe version has a straight mounting shank of 1.00.

Part No.

Model No.

E†.000/.002

G†

Hex Key

Torque (Ft/lbs.)

Holding Force

31210

Mill #3

1.625

0.875

0.69

0.75

1.968

1.13

0.71

8-32 on 1.550 BHC

4,000 lbs

31370

Lathe #6

1.75

0.84

0.75

2.1

0.71

4,000 lbs.

† Minimum Diameter the F dimension can be machined down to. *(6) mounting screws included

Part No.	Description	Price, USD	Buy Now
31210	Size #3 Mill 31210	$90.44	Add to cart
31370	Size #6 Lathe 31370	$132.68	Add to cart

DYNAFORCE CLAMPS... For Very Low Profile Machining

The majority of the Dyna-Force^® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an angle for positive downforce.

The clamp jaw is available with smooth or serrated faces.

The support surface of the Dyna-Force^® clamp can be installed flush with the fixure plate or raised to hold the workpiece off the fixture, enabling drill-through. Incredible Clamping and Hold Down Power Low Profile, Compact Design. 17-4 Stainless Steel. Smooth or Serrated

Part No.

Min

G ^Optimum

Max

Clamp

Drive

Key

Clamp Jaw⁺

^Torque

^Holding

^Travel

^Screw

^Size

^{&
Hardiness}

^(N.m.)

^{Force
(N)}

²⁸³¹⁴

²⁰

^24.9

¹⁹

^19.9

^4.5

^13.5

^3.25

⁵

^6.75

^6mm

^5mm

^{Smooth
34RC}

^9.9

⁸⁸⁹⁶

²⁸³¹⁸

²⁰

^24.9

¹⁹

^19.9

^4.5

^13.5

^3.25

⁵

^6.75

^6mm

^5mm

^{Serrated
44RC}

^9.9

⁸⁸⁹⁶

²⁸³²⁰

²⁵

^29.9

²⁴

^24.9

⁵

¹⁵

^4.5

^6.5

^8.25

^2.2

^8mm

^6mm

^{Smooth
34RC}

^23.9

¹¹⁵⁶⁵

²⁸³²²

²⁵

^29.9

²⁴

^24.9

⁵

¹⁵

^4.5

^6.5

^8.25

^2.2

^8mm

^6mm

^{Serrated
44RC}

^23.9

¹¹⁵⁶⁵

²⁸³²⁴

³⁰

^37.9

²⁹

^29.9

⁷

²⁰

^4.5

^7.5

^10.75

^3.8

^10mm

^8mm

^{Smooth
34RC}

^41.9

¹⁴²³⁴

²⁸³²⁸

³⁰

^37.9

²⁹

^29.9

⁷

²⁰

^4.5

^7.5

^10.75

^3.8

^10mm

^8mm

^{Serrated
44RC}

^41.9

¹⁴²³⁴

^{* Body diameter}

^{+ Smooth jaw only will have relief cut}

Part No.	Description	Price, USD	Buy Now
28314	Dyna-Force Clamp, 20mm Smooth 28314	$72.39	Add to cart
28318	Dyna-Force Clamp, 20mm Serrated 28318	$78.39	Add to cart
28320	Dyna-Force Clamp, 25mm Smooth 28320	$75.37	Add to cart
28322	Dyna-Force Clamp, 25mm Serrated 28322	$81.41	Add to cart
28324	Dyna-Force Clamp, 30 Smooth 28324	$114.59	Add to cart
28328	Dyna-Force Clamp, 30 Serrated 28328	$123.61	Add to cart

ID EXPANSION CLAMPS... For Holding Multiple Parts on an inside diameter.

The ID Xpansion clamp is the ideal way to hold multiple parts on an inside diameter for multiple machining on a vertical machining center or a horizontal machining center

These machinable clamps are produced in 11 sizes and can hold internal diameters from under 3/16ths inches to just under 7 inches. They use a heat treated tapered screw for expansion.

The flange diameter of the clamp is held to a close tolerance for precision locating in a machined pocket on work cubes and fixture plates.

The customer machines the mild steel clamp to match the bore of the part ensuring proper fit. Often times the clamps can be remachined for different size jobs.

One of the benefits of these low profile clamps is holding many lathe parts, for secondary machining, on one compact set up. They are quickly tightened with a hex key, torque driver or can be mated to hydraulic pull cylinders for automation.

Part

Model

E 0/ -0.002

G ⁺

^H*

^Torque

^Holding

^Number

^(Ft/lbs.)

^Force

³¹⁰⁰⁰

^#00

^0.42

^0.3

^0.24

^0.12

^0.787

^0.29

^0.16

^{2-56 on
.540 BHC}

^2-56

^0.16

^0.5

²⁵⁰

³¹⁰⁵⁰

^#0

^0.86

^0.63

^0.59

^0.23

^1.17

^0.49

^0.28

^{6-32 on
.825 BHC}

^8-32

^0.3

^3.6

⁹⁵⁰

³¹¹⁰⁰

^#1

^0.98

^0.75

^0.59

^0.23

^1.24

^0.56

^0.48

^{6-32 on
.910 BHC}

^1/4-20

^0.5

^13.3

¹⁹⁰⁰

³¹¹⁵⁰

^#2

^0.98

^0.75

^0.59

^0.23

^1.476

^0.79

^0.53

^{6-32 on
1.140 BHC}

^5/16-18

^0.56

^27.6

²⁵⁰⁰

³¹²⁰⁰

^#3

^1.13

^0.88

^0.69

^0.25

^1.968

^1.06

^0.71

^{8-32 on
1.550 BHC}

^3/8-16

^0.71

^49.3

⁴⁵⁰⁰

³¹²⁵⁰

^#4

^1.25

^0.81

^0.25

^2.205

^1.39

^0.9

^{8-32 on
1.790 BHC}

^1/2-13

^0.71

¹²⁰

⁵⁹⁰⁰

³¹³⁰⁰

^#5

^1.56

^1.25

^1.06

^0.31

^2.736

^1.65

^1.15

^{10-32 on
2.200 BHC}

^5/8-11

^0.79

²²⁴

^10,000

³¹³⁵⁰

^#6

^1.56

^1.25

^1.06

^0.31

^2.972

^2.03

^1.15

^{10-32 on
2.515 BHC}

^5/8-11

^0.79

²²⁴

^10,000

³¹⁴⁰⁰

^#7

^1.79

^1.48

^1.27

^0.31

^4.232

^3.06

^1.15

^{1/4-20
on 3.646 BHC}

^5/8-11

^0.79

²²⁴

^10,000

³¹⁴⁵⁰

^#8

^1.79

^1.48

^1.27

^0.31

^5.232

^4.06

^1.15

^{1/4-20
on 4.648 BHC}

^5/8-11

^0.79

²²⁴

^10,000

³¹⁵⁰⁰

^#9

^1.79

^1.48

^1.27

^0.31

^5.232

^6.89

^1.15

^{1/4-20
on 4.648 BHC}

^5/8-11

^0.79

²²⁴

^10,000

G^{+
Minimum diameter thr "F" dimension can be machined or
turned down to.}^{H*
- (3) Mounting Screws Included.}

^{MACHINING
AND INSTALLATION}

^{Expand clamp approximately .002 over relaxed diameter and machine to fit workpiece bore, either on lathe or mill.}	^{Machine a pocket, in the fixture, for the close tolerance "E" dimension and drill and tap mounting holes per "H" column. Drill and tap a hole from the "I" column in the center of the pocket for the tapered screw.}
^{If machining the clamp on a lathe use the nut provided, on the back of the clamp, to tighten the tapered screw. This nut is used only to machine the clamp.}	^{A recessed dowel pin may be installed in to the flange for additional rigidity if required.}
^{Range of expansion .008 to .020 depending upon size.}

Part No.	Description	Price, USD	Buy Now
31000	ID Xpansion Clamp, Size #00 31000	$35.80	Add to cart
31050	ID Xpansion Clamp, Size #00 31050	$35.80	Add to cart
31100	ID Xpansion Clamp, Size #1 31100	$35.80	Add to cart
31150	ID Xpansion Clamp, Size #2 31150	$38.10	Add to cart
31200	ID Xpansion Clamp, Size #3 31200	$46.56	Add to cart
31250	ID Xpansion Clamp, Size #4 31250	$61.12	Add to cart
31300	ID Xpansion Clamp, Size #5 31300	$78.34	Add to cart
31350	ID Xpansion Clamp, Size #6 31350	$85.95	Add to cart
31400	ID Xpansion Clamp, Size #7 31400	$136.68	Add to cart
31450	ID Xpansion Clamp, Size #8 31450	$167.76	Add to cart
31500	ID Xpansion Clamp, Size #9 31500	$472.29	Add to cart

COMPACT TOE CLAMPS... Positive Downforce using minimal machining fixture space

This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to locate the next work piece. The hardened steel clamping element has both a smooth surface for machined work pieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the fixture plate.

Part No.

E⁺

^{Cam Screw}

^{Total
^{Distance of} ^Movement}

^{Mounting
^{Screws (Included)}}

^{Torque ^(ft/lbs)}

^{Holding
^{Force ^(lbs)}}

²⁴¹⁰⁶

^1.70

^0.75

^.50

^1.00

^0.09

^0.75

^.25

^.62

^#10370

^0.05

^{5/16 -
18 x 3/4 LHCS}

^20.8

²⁰⁰⁰

²⁴¹⁰⁸

^2.12

^.45

^1.32

^0.11

^.38

^.62

^#10372

^0.1

^{3/8 - 16
x 3/4 LHCS}

⁶⁵

⁴⁰⁰⁰

²⁴¹¹⁰

^2.95

^1.5

^.99

^2.00

^0.13

^1.5

^.50

^1.25

^#10376

^0.1

^{1/2 - 13
x 1 1/4 SHCS}

¹⁰⁰

⁶⁰⁰⁰

Part No.	Description	Price, USD	Buy Now
24106	Compact Toe Clamp. Uses Cam Screw 10370 24106	$38.15	Add to cart
24108	Compact Toe Clamp. Uses Cam Screw 10372 24108	$43.02	Add to cart
24110	Compact Toe Clamp. Uses Cam Screw 10376 24110	$87.41	Add to cart

* Not available to Canadian customers.

E-commerce business and online market development Productivity improvement, project management, product development	CONTRACT MANUFACTURING Components, Equipment, Electronics and more! Click For BUYERS or Click for SELLERS	PRODUCTIVITY NEWS E-letter Back Issues For your free copy Register
		INDUSTRY DEPOT LINE CARD
home \| about us \| contact us \|faq \|info booth \| privacy policy \| marketplace
Copyright © 1999-2012 Inventory Depot, Inc. All rights reserved.

SEARCH Advanced search.

Back to Catalog Index

MANUFACTURERS

YOUR CART

AUTHENTICATION