Home    Industry Depot Catalogs    Shopping Cart  Contact Us 

Phone US & Canada 1-888-849-8034
International: 416-816-7447

SEARCH Advanced search.

Back to Catalog Index

AIR NEEDLE SCALERS 

Click below for details

 

 

CATEGORIES

MANUFACTURERS

YOUR CART

Cart is empty

AUTHENTICATION

Username

Password
Your e-mail:

Type the characters you see in the picture:

Get a different code

Descale, clean and remove paint, rust dirt or weld slag FAST with...

  • Tough & Durable Air Needle Scalers from Ingersoll Rand &Jet

Ingersoll Rand IR125  Automotive Standard Duty Needle / Chisel Scaler 
Ingersoll Rand IR125  Automotive Standard Duty Needle / Chisel Scaler

For surface preparation work involving the cleaning or removal of paint, rust, dirt, or weld slag, the IR125 is a durable, dependable, economical solution. 
19 needles.

Specifications :
Air Inlet NPT (Inches): 1/4 
Average CFM: 8.0 
Blows per Minute: 4600 
Length (Inches): 18.3 
Minimum Hose (Inches): 5/16 

  • Required Pressure (PSI): 90 
  • Stroke: 1 1/8", Bore: 1"
  • 19 Steel Needles 1/8" (3.2mm) diameter x 5" long. 
  • 4,600 blows per minute at free speed.
  • Lever handle
  • Weight 6.2 lbs. 

Part No.IRA IR125   Price $195.03USD each.     Add to cart   

Ingersoll Rand IRC182K1 Construction Industrial Duty Needle Scaler KitIngersoll Rand IRC182K1 Construction Industrial Duty Needle Scaler Kit

A complete industrial duty needle scaler and chisel kit including a straight throttle lever scaler, 5 inch needle attachment, an extra set of 5 inch and 7 inch needles, a 6 1/8" angle chisel, a 6 1/8" straight chisel and a flat chisel and carrying case.

Specifications :
Air Inlet NPT (Inches): 1/4 
Average CFM: 6.5 
Blows per Minute: 4000 
CFM: 26 
Length (Inches): 15 
Minimum Hose (Inches): 3/8 
Required Pressure (PSI): 90 
Stroke: 1 1/16

Part No.IRC 182K1   Price $785.26USD each.     Add to cart

Ingersoll Rand 182L Construction 9 IN. NEEDLE CHISEL SCALER
Ingersoll Rand 182L Construction 9 IN. NEEDLE CHISEL SCALER

Needle chisel scalers are great for removing rust, paint, dirt, and weld on metal surfaces, even in tight spaces, corners, or curved surfaces.

 
182L Needle Chisel Scaler Features
Long nozzle section that extends retainer life and permits the use of a variety of accessories. 
Positive chisel retainer is simple to operate. 
Strengthened head block holds up under the most extreme conditions. 

Specifications :
Throttle Type Lever 
Weight lb 4.4 
Length in 9 
Piston Stroke in 1 1/16 
Bore in 15/16 
Blows per Minute 4000 
Hose Connector Pipe Tap in 1/4 
Recommended Hose Size in 5/16 
Air Consumption cfm 13, 6.5 Average cfm @ 15 second run time, 90 psi required air pressure 
Standard Equipment :
Positive lock chisel retainer 

Part No. IRC 182L  Price $509.94USD each.       Add to cart

For pricing, click item "Add to Cart" icon or call 888-849-8034.

Ingersoll Rand 182LNA1 Construction 15 IN. NEEDLE SCALER
Ingersoll Rand 182LNA1 Construction 15 IN. NEEDLE SCALER

Needle scalers are great for removing rust, paint, dirt, and weld on metal surfaces, even in tight spaces, corners, or curved surfaces.

182LNA1 Features:
Adjustable bayonet-type needle housing lock allows adjustment without special tools. 
Choice of three needle materials permits custom selection for various surfaces. 
Rubber-faced throttle valve means positive sealing. 
Tested and approved in accordance with MIL-S-2349A (Ships). 
Precision heat-treated needles for maximum performance.

Specifications :
Needle Housing Shape Round, Housing Lock, Straight Handle, Lever Throttle 
Weight lb 6.9 
Length in 15 
Piston Stroke in 1 1/16 
Bore in 15/16 
Blows per Minute 4000 
Hose Connector Pipe Tap in 1/4 
Recommended Hose Size in 5/16, Required Pressure 90 psi 
Air Consumption cfm 13, Average cfm@15 second run time 3.0
Standard Equipment includes Needle set No. 6W206 consisting of (19) 1/8" (3 mm) diameter Steel Needles, 5" (127 mm) long. NS11-22-19 

Part No.IRC 182LNA1    Price $630.23USD each.    Add to cart

JET F-25NS Jet Tools & Equipment NEEDLE SCALERS / FLUX CHIPPER
JET F-25NS Jet Tools & Equipment NEEDLE SCALERS / FLUX CHIPPER

NEEDLE SCALERS / FLUX CHIPPERS 
Heat-treated barrels and pistons for extended tool life 
Wide angle chisel standard with F-25 and F-25NS 
Lever lock retainer on Model JSG-9121 
Ball lock retainer on model F-25 
Needle scalers can be used either as a scaler or flux chipper by removing scaler attachment 
Includes: 
1/4" NPT air inlet size 
3/8" air hose ID 
90 PSI air pressure 
4 CFM air consumption
Specifications: 
Blows PerMinute: 4,000 
Stroke Length: 7/8 
Number of Needles: 19 
Size of Needles (mm): 3 x 180 
Overall Length (in): 16-3/8 
Net Weight (lbs): 5-3/4 

Part No. JET F-25NS    Price $282.05USD each.       Add to cart

JET JSG-9121NS Jet Tools & Equipment NEEDLE SCALERS / FLUX CHIPPER 
JET JSG-9121NS Jet Tools & Equipment NEEDLE SCALERS / FLUX CHIPPER

Features: 
Heat-treated barrels and pistons for extended tool life 
Wide angle chisel standard with F-25 and F-25NS 
Lever lock retainer on Model JSG-9121 
Ball lock retainer on model F-25 
Needle scalers can be used either as a scaler or flux chipper by removing scaler attachment 
Includes: 
1/4" NPT air inlet size 
3/8" air hose ID 
90 PSI air pressure 
4 CFM air consumption 
Specifications: 
Blows Per Minute: 4,600 
Stroke Length: 1-1/8 
Number of Needles: 19 
Size of Needles (mm): 3 x 180 
Overall Length (in): 15 
Net Weight (lbs): 5-1/2

Part No.JET JSG-9121NS      Price $192.31USD each.               Add to cart

 

 

E-commerce business and online market development

Productivity improvement, project management,  product development

CONTRACT MANUFACTURING                    

Components, Equipment, Electronics and more!

  Click For BUYERS        or       Click for SELLERS

PRODUCTIVITY NEWS E-letter Back Issues  For your free copy Register  
INDUSTRY DEPOT  LINE CARD

      home | about us | contact us |faq |info booth | privacy policy | marketplace        

   Copyright 1999-2013 Inventory Depot, Inc. All rights reserved.