Home :: Workholding & Handling :: Electromagnetic Chucks :: MagVISE Electro-Permanent Chucks

MagVISE Electro-Permanent Chucks

Cut set-up & part change-over times in half 

 MagVISE electro-permanent magnetic chucks...

  • Provide uniform part holding with no workpiece deformation

  • Cut set-up & part change-over times in half

  • Improve machining for better finish and tool life

Features:

You can use magnetic workholding chucks for drilling, milling and boring operations on workpieces over 0.4" thick.  The magnetic force makes difficult workholding jobs faster and safer allowing you to machine on 5 sides of a workpiece and through-hole drill.  Other productivity boosting features include;

  • Power is only required for clamping and un-clamping. You'll never lose holding power during a power outage.
  • Simplify your holding by eliminating different sized vises for different workpieces.
  • Spring-loaded induction blocks hold even hold warped stock secure.
  • Uniform magnetic clamping pressure prevents part distortion and dead spots that cause chatter and tool wear.
  • The rigid magnetic holding force reduces vibration and harmonics for improved surface finish and long tool life.
  • MagVISE EEPM chucks are used for normal and heavy duty drilling, milling, and boring operations on medium or large sized work pieces. Rough and uneven stock is no problem to hold. Simply use the sliding pole extensions to support uneven work pieces. A minimum of 4 alternate poles contact is necessary for optimum magnetic holding power. Minimum thickness of job- 3/4".

    EEPM magnetic workholding chucks drastically reduce set up time while maintaining uniform holding power over the entire work piece. Since work piece distortion does not occur, tool chatter is minimized and surface finish and tool life are improved.

    No electricity is needed to keep the EEPM chuck ON,… the magnet keeps on holding tight even during a complete power loss. Easily integrated with Pallet changing and FMS Systems.

    Accessability, versatility and rigidity for more productivity!

    The Old Way: Vises and Chucks versus The Earth-Chain Way: EEPM Magnetic Chucks. Simpler, less distortion, more productivity

    Benefits:

  • Cut set-up & part change-over times in half. 

  • Improve machining for better finish and longer tool life.

  • Uniform holding = No workpiece deformation.

Choose magnetic workholding for uniform holding of the workpiece without part distortion or dead spots.  Uniform workholding reduces chatter and harmonics for improved finish and tool life.

No risk to you!  If not completely satisfied, you get a full 100% Money-Back refund!

  •  

Products

Induction Block 70 x 70 x 25mm
Induction Block 70 x 70 x 25mm 2 x 2 x 0.6 inches, NA poles, Part No. EEPM-S70

Our price: $24.86 ($CAD31.08)
Market price: $29.00 , save 14%
Quantity
MagVISE 30
MagVISE 30

Our price: $321.60 ($CAD402.00)
Market price: $402.00 , save 20%
Quantity
MagVISE 45
MagVISE 45

Our price: $336.00 ($CAD420.00)
Market price: $420.00 , save 20%
Quantity
MagVISE 60
MagVISE 60

Our price: $356.00 ($CAD445.00)
Market price: $445.00 , save 20%
Quantity
MagVISE 90
MagVISE 90

Our price: $378.40 ($CAD473.00)
Market price: $473.00 , save 20%
Quantity
MagVISE Connected Induction Block 12 x1.97x .96 inches, NA poles, Part No. EEPM-IB625
MagVISE Connected 6-Pole Induction Block 12"L x 1.97"W x .98"H

Our price: $61.60 ($CAD77.00)
Market price: $77.00 , save 20%
Quantity
MagVISE Connected Induction Block 4 x1.97x .96 inches, NA poles, Part No. EEPM-IB225
MagVISE Connected 2-Pole Induction Block 4"L x 1.97"W x .98"H

Our price: $23.20 ($CAD29.00)
Market price: $29.00 , save 20%
Quantity
MagVISE Connected Induction Block 6 x1.97x .96 inches, NA poles, Part No. EEPM-IB325
MagVISE Connected 3-Pole Induction Block 6"L x 1.97"W x .98"H

Our price: $35.20 ($CAD44.00)
Market price: $44.00 , save 20%
Quantity
MagVISE Connected Induction Block 8x1.97x .96 inches, NA poles, Part No. EEPM-IB425
MagVISE Connected 4-Pole Induction Block 8"L x 1.97"W x .98"H

Our price: $40.00 ($CAD50.00)
Market price: $50.00 , save 20%
Quantity
MagVISE Electro-Permanent Magnetic Chuck 10 x 16 inches,  18 poles, Part No. EEPM-2540W See details
MagVISE Electro-Permanent Magnetic Chuck 10 x 16 inches, 18 poles, Part No. EEPM-2540W

MagVISE Electro-Permanent Magnetic Machining and Milling Chuck for 5 sides free for machining. Power only required for clamping and un-clamping. No workpiece deformation. Fast workpiece change-over. Ability to hold warped stock. More secure holding for less vibration and longer tool life. Call for shipping charges.


Our price: $4592.00 ($CAD5740.00)
Market price: $4920.00 , save 7%
Quantity
Add to list...