Home :: Material Testing Instruments :: Roughness Gauges

Roughness Gauges

Get Precise & Accurate Surface Roughness Readings with ...

PHASE II+

Surface Roughness Meters

Due to the recent 301 Tariff imposed by the U.S. Department of State these items will be subject to a 25% surcharge on the shown prices.

  • The leading North American Surface Roughness Meter

  • Most instruments are backed with a 5 Year Warranty and Free Lifetime Technical Support.

Products

SPG-1000 Surface Profile Gauge
SPG-1000 Surface Profile Gauge. The SPG-1000 digital surface profile gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured. The surface profile gauge is initially set to zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the surface profile gauge to display the peak to valley height. A number of measurements can be made and the average taken.

Supplied in Carrying Case with Glass Zero Plate, Operation Manual, Calibration certificate and Batteries

Our price: $533.97 ($CAD667.46)
Market price: $595.00 , save 10%
Quantity
SRG-2000 Surface Roughness Tester Profilometer
The PHASE II SRG-2000 surface roughness tester profilometer is a pocket-sized economically priced instrument for measuring surface roughness texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either surface roughness parameter Ra, Rz, Rms(Rq) and Rt at the touch of a button, combined with the selected cutoff length. External calibration of the surface roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user about each individual measurement status when ready.

The easy to use SRG-2000 surface roughness tester profilometer operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas of application are wide spread. It is suitable for inspection departments, quality control, on the shop floor during machining, during assembly, and on site.

The SRG-2000 determines surface roughness parameters Ra,Rz, Rms(Rq) and Rt within a wide measuring range. The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ASME B46.1. Surface Roughness parameter Ra is computed to conform to ISO and Rz is computed to conform to DIN. NIST Traceable Price includes 25% surcharge due to the recent 301 tariff imposed by the US Dept of State.

Our price: $1556.49 ($CAD1945.61)
Quantity
SRG-4000 Handheld Surface Roughness Tester Profilometer
SRG-4000 Handheld Surface Roughness Tester Profilometer. The PHASE II SRG-2000 surface roughness tester profilometer is a pocket-sized economically priced instrument for measuring surface roughness texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either surface roughness parameter Ra, Rz, Rms(Rq) and Rt at the touch of a button, combined with the selected cutoff length. External calibration of the surface roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user about each individual measurement status when ready.

The easy to use SRG-2000 surface roughness tester profilometer operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas of application are wide spread. It is suitable for inspection departments, quality control, on the shop floor during machining, during assembly, and on site.

The SRG-2000 determines surface roughness parameters Ra,Rz, Rms(Rq) and Rt within a wide measuring range. The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ASME B46.1. Surface Roughness parameter Ra is computed to conform to ISO and Rz is computed to conform to DIN. NIST Traceable Price includes 25% surcharge due to the recent 301 tariff imposed by the US Dept of State.

Our price: $1917.07 ($CAD2396.34)
Quantity
SRG-4000-050 Precision Stand for SRG-4000
SRG-4000-050 Precision Stand for SRG-4000 Price includes 25% surcharge due to the recent 301 tariff imposed by the US Dept of State.

Our price: $403.10 ($CAD503.88)
Quantity
SRG-4600 Handheld Surface Roughness Gauge w/External Stylus
SRG-4600 PORTABLE SURFACE ROUGHNESS TESTER/ PROFILOMETER

The newest addition to our state-of-the-art surface roughness testers /profilometers, the SRG-4600 will instill the highest level of confidence in your production, shop floor or QC lab. Extended memory and output coupled with many updated useful functions, the SRG-4600 surface roughness tester/profilometer is clearly the new leader in ultra accurate surface roughness/profile testing. These surface roughness testers/profilometers are distinguished by a high level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and highly accurate readings from this Phase II surface roughness tester/profilometer is offered via 9 popular surface roughness scales including Ra, Rq(Rms), Rt, Rz and Rmax.
The new diamond stylus is hypersensitive and sophisticated enough to allow for a .001 (um) micron display resolution. The SRG-4600 surface roughness tester/profilometer can utilize an easy interface to allow for changes of in/mm (uin/um), cutoff length, sampling length, parameters, level of test(stylus position), digital filters and more! Surface roughness measurement results are displayed as large characters on the LCD screen for easy recognition.
Battery powered portability allows the SRG-4600 surface roughness tester/profilometer to mobilize productivity throughout the shop.Further, a wireless Bluetooth auto-start comes standard with each unit. Optional Micro Printer is available, as well as optional stand and software.

SRG-4600 surface roughness tester features:

9 Different roughness parameters
Inside/Outside Diameters
Stylus position indicator
USB/Bluetooth output to PC
Large Memory
SRG-4600 Surface Roughness Tester/profilometer Technical Specifications:

Measures flat, Inside and Outside Diameters
Measures grooves and recessions: wider than 0.16in (4mm)
Roughness parameters: Ra, Rz, Rq (Rms), Rt, Rs, Rsm, Rmax, Rpc, Rmr.
Roughness standards: ISO/DIN/JIS/ANSI
Display resolutions: 0.01

Our price: $2157.45 ($CAD2696.81)
Quantity